Nitronic 60 Plate Suppliers
Nitronic 60 Plate Stockist, Nitronic 60 Sheet Stockist, ASTM A240 Nitronic 60 Chequered Plate Stockholder, Nitronic Alloy 60 Cold Rolled Plate
Largest Manufacturer & stockist of Nitronic Alloy 60 Plates Supplier, Nitronic 60 High Quality Plates Exporter in India, Nitronic 60 Cr Plates Stockist, Uns S21800 Nitronic Alloy 60 Plate Dealer, Nitronichr Plate Distributors, Din 1.3964 Nitronichot Rolled Plates Manufacturer & Suppliers, Alloy 60 Sheet Stockist, Nitronic 60 Plates N-60 Plate, Nitronic UNS S21800 Alloy Plate, ASTM A182 Nitronic 60 Stainless Steel Plate, ASTM A249 Nitronic 60 Alloy, ASTM A194 Nitronic 60 Alloy, ASTM A336 Nitronic 60 Alloy
Nitronic 60 Plate is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 Plate is similar to Type 309 S.S., and far superior to Type 304S.S. Nitronic 60 Chequered Plate is a stainless steel that has a better resistance to corrosion than 304 stainless steel. Nitronic 60 Cold Rolled Plate also has superior Chloride pitting resistance to 316 stainless steel.
NITRONIC® 60 (Alloy 218) (UNS S21800)
Nitronic 60 SHEET / PLATE (Alloy 60®)
| UNS: |
S21800 |
|
Specifications: |
ASTM A240 |
| Specifications | ASTM A240 / ASME SA240 |
| Standard | ASTM, ASME and API |
| Thickness | 4.0mm – 100mm |
| Specialize | Plate, Shim Sheet, Perforated Sheet, B. Q. Profile. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Grade | Stainless Steel Plate Nitronic 60 (UNS S21800) |
Nitronic 60 Material
- Specialty Steel
Nitronic 60 Plate Specifications
- AMS 5845
- ASTM A314
- AWS ER218
- UNS S21800
Nitronic 60 Plate Applications
- Pins and Bushings
- Pump Components
- Roller Bearings
Nitronic 60 Plate Features
- Galling and Wear Resistant
- Good Formability
Nitronic 60 Plates Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| Nitronic 60 | – | S21800 |
60 Nitronic Plates Chemical Composition :
| Grade Nitronic 60 |
C | N | Ni | Cr | Mn | S | Si |
| MIN | 0.10 | 0.08 | 8.0 | 16.0 | 7.0 | 0.030 | 3.5 |
| MAX | – | 0.18 | 9.0 | 18.0 | 9.0 | – | 4.5 |
ASTM A240 Nitronic 60 Plates Mechanical properties:
| Nitronic 60 | Condition | Ultimate Tensile Strength (ksi) | Yield Strength (0.2%) ksi | Elongation in 4D (%) | Reduction of Area % | Hardness HB |
| Solution Treated (AMS 5848) <0.5″ | 105 | 55 | 35 | 55 | 170-255 | |
| Solution Treated (AMS 5848)>0.5″ | 95 | 50 | 35 | 55 | 170-255 |
Nitronic 60® is certified to numerous national and international specifications, including, but not limited to:
- AMS 5848
- ASME SA 193
- ASME SA 479
- ASTM A 193
- ASTM A 193 Class 1C
- ASTM A 276
- ASTM A 479
- UNS S21800
Types of Nitronic 60 Plates
|
|
Useful information for Nitronic 60 Plate buyers
NITRONIC 60 Plate Applications
- NITRONIC 60 have Superior corrosion resistance
- NITRONIC 60 Plate is Almost double the yield strength
- NITRONIC 60 Plate is Exceptionally low magnetic permeability
- NITRONIC 60 Plate has Outstanding cryogenic properties
- NITRONIC 60 Plates have an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
- NITRONIC 60 Plate Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
- NITRONIC 60 Fastener – High strength, and higher strength fasteners can improve the durability of you equipment
- NITRONIC 60 Marine hardware – Mastings, tie downs
- NITRONIC 60 Marine and Pump shafts – better corrosion than types 304 and 316, with double the yield strength.
- NITRONIC 60 Valves and fittings – better corrosion than types 304 and 316, with double the yield strength.
- NITRONIC 60 Reduced cross sections – NITRONIC 60 Plate have better corrosion than types 304, 316 and 17-4
Nitronic 60 Plate Physical Properties
Annealed
| Property |
At
|
Value |
Unit
|
|
Density
|
24°C | 7,622 | Kg/m3 |
|
Electrical Conductivity
|
24°C | 1.7% | IACS |
|
Electrical Resistivity
|
24°C | 0.982 | Microhm.m |
|
Poisson’s Ratio
|
0.298 | ||
|
Modulus of Elasticity (tension)
|
24°C | 180 | GPa |
|
Modulus of Elasticity (torsion)
|
24°C | 57 | GPa |
|
Relative Magnetic Permeability
|
1.003 | ||
|
Cofficient of Expansion
|
24-93°C | 15.8 | x10-6 / °C |
| 24-316°C | 17.3 | x10-6 / °C | |
| 24-538°C | 18.0 | x10-6 / °C |
Nitronic 60 Plate Wear and Calling Properties
Unlubricated Calling Resistance of Stainless Steels
Threshold Galling Stress, MPa
|
Grade
|
Condition
|
Hardness
|
410
|
416
|
430
|
440C
|
303
|
304
|
316
|
17-4 PH
|
Nitronic
|
Nitronic
|
|
HB
|
32
|
60
|
||||||||||
| Nitronic 32 | Annealed | 235 | 317 | 310 | 55 | + | + | 207 | 21 | + | 207 | + |
| Nitronic 60 | Annealed | 205 | + | + | 248 | + | + | + | 262 | + | + | + |
HSR – Hardened & Stress Relieved
+ – did not gall at stresses up to 345 GPa
Nitronic 60 Plate Dynamic Coefficient of Friction
Tested in water, self mated
|
Test Stress Level, MPa
|
||||||
|---|---|---|---|---|---|---|
|
0.8
|
5.6
|
14.0
|
28.0
|
56.0
|
112.0
|
|
| Nitronic 60 | 0.50 | 0.35 | 0.38 | 0.44 | 0.44 | 0.44 |
| Stellite 6B | 0.30 | 0.60 | 0.63 | – | – | – |
| Nitronic 32 | – | – | 0.45 | 0.53 | 0.65 | 0.58 |
Nitronic 60 Plate Fabrication
Nitronic 60 Plate can be hot forged. After forging the workpiece must be solution annealed.
Nitronic 60 Plate Machinability
The alloy is difficult to machine, rated at 50% of 304 and 23% of the free cutting carbon steel AISI B1112. Sharp, rigid, carbide tipped tools and well powered machines are recommended, with the use of heavy cuts and slow speeds.
Nitronic 60 Plate Heat Treatment
Nitronic 60 Plate is fully austenitic and can not be strengthened by heat treatment. Solution annealing is carried out at 1060°C, followed by water quenching
Nitronic 60 Plate Weldability
Nitronic 60 Plate is readily welded by all conventional processes. Autogenous GTAW welds are sound, with wear characteristics approximating to the base metal. GTAW welds in heavy sections are also sound and weld tensile strength is slightly higher than base metal. Wear properties are near but below base metal. Pure argon is used as shielding gas and AWS A5.9 ER 218 filler metal is used. Pre-heating and post heating are not needed.
Specialized in:
SUS 60 No.1 surface10mm 5mm 6mm hot rolled Nitronic plate manufacturer, 60/NO.1 Nitronic plate, 60 cold rolled NO.4 hair line finished Nitronic plate, TISCO cold rolled 60 Nitronic plate, 60 cold rolled Nitronic plate price best quality 60 Nitronic plate, hot rolled 6mm thick astm a240 60 Nitronic plate, Tisco 60 Nitronic plate in stock, marine grade aisi 60 Nitronic plate, 60 Nitronic Plate Cold And Hot Rolled, 60 ba finish Nitronic plate, AISI Nitronic armor plate Grade7, 60 2B Nitronic plates, asme sb-240 60 Nitronic bbq plate, Martensitic 60 Nitronic plate, ASTM 60 Nitronic plate, ASME SA240 hot rolled 60 Nitronic thick plate,60 2B+PVC Nitronic Plates, 60 mirror fish Nitronic plate, checkered 60 grade stock Nitronic plates, Best selling hot rolled TISCO 60 Nitronic plate, 60 Embossing Nitronic Plate, asme sb-240 60 Decorative pattern Nitronic plate, asme sb-240 60 Nitronic plate
NITRONIC is a registered tradename of AK Steel
Nitronic 60 Plate Processing
The majority of normal processing can be performed on Nitronic 60 Plate
MD Exports LLP Offers Following process for Nitronic 60 Plate
Nitronic 60 Plate Packing & Shipping
Each order is packaged according to the customer’ s standards including preparation for export such as wooden case, pallet or according to customer’s requirement All shipping documentation is provided for Nitronic 60 Plate delivery from mill to customer.
Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and brief the client about the nature of packing required as well as various documentation formalities when moving from India.
Supply Area :
We Supply Our Nitronic 60 Plate to various countries like Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.
Nitronic 60 Plate Inventory
Nitronic 60 Plate Application Industries
MD Exports LLP offers a broad range of Nitronic 60 Plate through a worldwide network of stock-keeping branches.these Nitronic 60 Plate is use in various industries like:
- Fertilizers Industry
- Aerospace Industry
- Nuclear Power Plant Industry
- Chemical Industry
- Oil & Gas Industry
- Refineries Industry
- Petrochemical Industry
- Paper Industry
MD Exports LLP inc is largest suppliers of Nitronic 60 Plate. we are supplying Nitronic 60 Plate in Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.we assured our client that we are standing behind our product which we have supplied as well as we issued a quality certificate along with our product which we manufacture supplies and exports
Available Steel Plate Stock
Our Global Network
Contact MD Exports LLP Steel Alloys today for a best offer & competitive quotation..
Call:
Email: [email protected]
